Pharmaceutical Manufacturers Choose SteraMist™ BIT™ To Streamline Disinfection

Pharmaceutical Manufacturers Choose SteraMist™ BIT™ To Streamline Disinfection

Attending INTERPHEX? SteraMist™ BIT™ is being featured at Interphex Exhibit Booth #3835. Join our Technical Theater on 4/27 at 3:00-3:30 on Stage 6, Booth 1677.

Pharmaceutical Manufacturing Facilities Choose SteraMist powered by Binary Ionization Technology® to Remain Compliant with Industry & Government Regulations for a Controlled Environment.

Sustaining environmental control and reducing microbiological contamination in a pharmaceutical manufacturing facility requires following a strict standard operating procedure (SOP) and numerous Certificates of Analysis (CoA) for quality assurance.  Specifically, the cleaning/disinfection SOP must meet a facility’s need for regular and frequent disinfection/decontamination that adheres to both internal, industry, and federal guidelines. TOMI™ Environmental Solutions, Inc. partners with every pharmaceutical client to provide guidance in developing highly effective disinfection/decontamination protocols. As well as direction throughout the entire equipment qualification & validation process.

The cost to get a new drug to market can be well over one billion dollars. As a result, a contamination issue is devastating and expensive to the entire process. Sources for pollution are abundant in drug manufacturing and include human error, air contaminates, equipment, and raw materials. Due to moisture from water intrusion and/ or cleaning processes molds spores can become common in certain of these processes.

Ensuring all surfaces remain fully disinfected and decontaminated is fundamental for the highest level of quality control. Whether utilized for ante-areas, clean rooms, or direct on equipment and electronics for materials transfer, SteraMist™ powered by Binary Ionization Technology (BIT™) meets the disinfection/decontamination requirements for all pharmaceutical manufacturing areas; from communal rooms to the most stringently guarded areas. It’s the unique science behind the technology that makes this system so versatile and effective.

H2O2 Converted by Plasma Science

SteraMist™ BIT’s patented Activated Ionized Hydrogen Peroxide (AIHP) technology disinfects high touch, hard to reach non-porous surfaces without contaminating the environment with any toxic by-products or, corroding or oxidizing materials/equipment. After disinfection/decontamination, the environment is left only with oxygen & water (humidity). This makes it an ideal solution for reducing cross contamination between treated surfaces during the production, purification, and packaging of pharmaceuticals.

An effective broad-spectrum surface disinfectant, SteraMist™ BIT™ is:

  • Easily incorporated into current cleaning procedures
  • Easy to transport and can be configured to treat multiple spaces simultaneously
  • Economical, and easy to apply
  • Bleach and Chlorine free
  • Formaldehyde, Glutaraldehyde, Titanium dioxide, Peracetic acid, free disinfecting formula
  • Silver ion free formula, leaves no residues
  • Great for frequent, daily use
  • A multi-purpose, multi-room, multi-surface daily disinfectant

SteraMist™ BIT™ is Fully Validated to Comply with Good Manufacturing Practices (GMP) Standards

Need support making sure your facility is compliant with Good Manufacturing Practices? Or want an expert’s opinion as you work through the equipment validation process? TOMI’s pharmaceutical experts can assist you through every step, from Design Qualification (DQ) and Installation Qualification (IQ) to Operational Qualification (OQ), Performance Qualification (PQ) and Maintenance Qualification (MQ).

Download Case Study Compilation: Global Pharmaceutical Manufacturers Validate Disinfection Protocols Utilizing SteraMist™ BIT™. Read more in this press release.


Add Comment

Your email address will not be published. Required fields are marked *